When setting up a new tank in iWell, you can now choose between utilizing standard inch multiplier or uploading your strapping table. In this guide, we will cover the following:
Setting up strapping tables
1. In iWell, click on Manage and Wells. Select the well you are working on. Next, click on Tanks, Meters & Allocations. Click on the tank you'd like to update. On the Basic Information page of the tank, make sure to check the 'Use Strapping Tables' option. Click on 'Setup'
NOTE. The inch multiplier can be left empty or you can have a pre-determined inch multiplier which will serve as back up, in case a reading does not fall within the saved parameters.
2. There are two alternatives to uploading strapping tables.
Manually add your inch to volume
Import a file with strapping table values
If you choose to import the file, make sure the file is saved as an Excel CSV format. Once uploaded you will see your strapping values listed. In order to finalize the setup process, you must click on the 'Save' button of the strapping table dialog.
Viewing strapping table values in Pumper mode
3. Once saved, you can see inch to volume ratio in the pumper view. Click on 'Strapping Table' to see the values.
If you'd like some extra assistance with your setup, reach out via chat to our support team, email us at support@iwell.info or give us a call at 800-219-0141. We're always ready to help.