This article contains the following topics:
Changing tank readings
Navigating to different report dates
When you log into iWell, click on the ‘Pumper’ icon (to the right of the ‘Dashboard’ icon) on the top-left corner of the page, to enter into Pumper mode.
In Pumper mode, find the Well with the error, and click on "Report" to enter.
Click on "Report date" on the top right hand corner, to the date where the error was entered.
Change the reading(s) to the correct ones.
IMPORTANT
If you change the "Previous reading" on that date, you will also need to change the previous day's "Current reading" to match.
i.e. If you change the 'Previous reading' for July 6th, you will need to change the 'Current reading' for July 5th, to the same value.
If you change the "Current reading" on a date, you will also need to change the next day's "Previous reading" to match.
i.e. If you change the 'Current reading' for July 6th, you will also need to change the 'Previous reading' for July 7th.
ALWAYS make sure to click on "Submit and close" or "Submit and go" at the bottom of the page before moving on from each date.
