1. To start managing your remote monitors, go to Manage, then click Remote Monitors
2. You will see the list of available remote monitors for your tanks. To manage your remote monitors, click on the update icon (gear icon), located on the far-right side of the table.
3. In the detail screen, you can update:
Primary readings. Time of the day when the sensor will gauge the tank and save the production data. The time zone is set for CST
Reading periods. Frequency of readings, e.g. every 2, 4, 6, 8 hours, etc.
Transmission frequency. Number of times a day the sensor will send in production data
Tank assignment. You can select the tank that will be associated to the remote monitoring unit
When you're done, click Save.